Inspection methods of Combined punching and shearing machine
Inspection methods of combined punching and shearing machine
First of all, the surface of the cutter board should not be uneven, and the joint of the door and the cover should be leveled. All components shall be internally lapped and painted, and the painted surface shall be smooth, uniform in color and free from wrinkles and appendages. Secondly, the transmission gear should be greased again. Move the cutter board by hand to check whether each part can operate normally.
If there is no problem, you can start the high-voltage electric shock, high speed to see if it can also run, two to four hours to see if the temperature of the rolling bearing is less than 63 degrees.
Combined with punching and shearing machine and mechanical profile punching and shearing machine, it integrates punching, plate shearing, angle steel shearing, profile shearing and other capabilities. Combined with the advantages of light weight, small volume and low noise, punching and shearing machine is an ideal equipment for modern machinery manufacturers, such as metallurgy, bridge, communication, electric power and other industries.
In order to meet the needs of real production, the new combined punching and shearing machine independently designed a multi-capacity hydraulic combined punching and shearing machine, in order to reach the net surface more neat and smooth, good-looking, small rib mark, high added value.
CATEGORY AND TAGS:
