What are the advantages of Four-roller Plate Rolling Machine?

1. The second generation Four-roller Plate Rolling Machine.

2. The sound card frame and the tool post are welded by general electric welding, the ground stress is removed by vibration, and the precision and wear resistance are good.

3. Choose an excellent integrated hydraulic transmission system with good credibility.

4. Three-point support point linear guide is used to clear the gap between the support points and improve the cutting quality.

5. The adjustment of the blade clearance handle is fast, precise and convenient.

6. Rectangle frame cutter head. All four tooth surfaces can be used, and the service life is long.

7. The shearing angle is adjustable to reduce the distortion of the thick plate.

8. The upper tool table adopts an inwardly inclined structure, which is conducive to blanking and improves the precision of manufacturing.

9. It has the function of cutting by section.

Four-roller Plate Rolling Machine maintains the main points of each oil standard lubrication and manual service lubrication points, according to the requirements of the equipment in the lubrication, and carries out the oil supply to each oil standard lubrication and manual service lubrication points in accordance with the regulations.
After connecting to the switching power supply, carry out fitness exercises on the front and back sides of the lower roller and the upper roller elevator to check whether all fitness exercises are normally stuck. Carry out the actual operation according to the steel coil production and processing procedures and operating steps. When the upper roll elevator reaches the limit position, pay great attention to the safe operation of the machinery and equipment. When the main drive system of the four-roller bending machine is shut down, the lifting of the upper roller can be carried out, the aligning of the rotating rolling bearing and the tilting of the upper roller can be carried out.

In the whole process of operation, if irregular noise or impact is found, it should be shut down for inspection. In actual operation, all staff members must be in harmony with each other, follow the command of the person responsible for the steel coil, and do not have a dynamic password, and it is strictly forbidden to clean up. When carrying out the actual operation of the steel coil, pay great attention to the fact that the hand is pressed by the thick steel plate and the thick steel plate is rolled together. When hoisting thick steel plates or steel wire rope drums by driving, be careful not to collide with the equipment. After the steel coil is finished, ensure that the place is clear after the completion of the work and materials, and immediately cut off the power during the maintenance of the machinery and equipment.

CATEGORY AND TAGS: