1. Streamlined design originated from EU, heat treatment of machine frame, high rigidity workbench, optional mechanical crowning device, ensuring bending precision.
2. Hydraulic synchronous control and Estun CNC programmable controller guarantee precise repeatability and easy use.
3. Integrated hydraulic system (Germany Bosch Rexroth) can automatically switch to slow bending in quick way.
4. X ,Y‐axis realize accurate positioning function through CNC E300 controller programming ,servo drive and servo motor.
5. Latest servo response hydraulic control technology, the machine tool is more stable and reliable.
6. Optimal parameter ratio and optimal core configuration guarantee stable performance and more convenient operation.
7. WC67K standard single-axis back gauge system, single-axis bending angle system and V-axis compensation function any type irregular work pieces can be done with suitable die.

• Estun E300 double-servo controller
• Controller controls and adjusts Y-axis and X-axis
• Servo drive and control positioning of X-axis and Y-axis
• Use HIWIN ball screw and linear guide rail, accuracy 0.05mm
• Front material supporter
• Germany Bosch Rexroth hydraulic valve block
• Germany EMB oil tube connector
• Germany Siemens main motor
• France Schneider electrics
• Hydraulic & electrical overload protection
• Upper and lower dies（86°, R0.6mm, material: 42CrMo)

• 4 axes are supported, viz, X-axis, Y-axis, R-axis and C-axis.
• Automatic calculation of the block position, according to the bending angle, material, thickness and mold parameters.
• The back gauge can be controlled in a high-accuracy since the servo systems control X-axis and R-axis.
• Optional hydraulic or mechanical to control the C-axis.
• Program in absolute value or angle.
• Materials and die informations are programable.
• Language setting and unit setting.

• EN 12622:2009 + A1:2013
• EN ISO 12100:2010
• EN 60204-1:2006+A1:2009
• Front Finger protection ( safety light curtain )
• South Korea KACON pedal switch ( safety grade 4 )
• Back metal safety fence, CE standard
• Safety relay monitor pedal switch, safety protection
• Safety standard ( 2006／42／EC）

Standard Configuration

CE Standard Electrical System

Schneider Electrics - France

Siemens Motor

Sunny Oil Pump-GermanyUSA

Bosch Rexroth Valve -Germany

KRRASS Pedal Switch

Quick clamps

Double Linear Guide Back Gauge Beam

Backgauge use ball screw and linear guide rail

Hight-precision fine-tuning back finger stopper

X Axis is driven by stepper motor and invetrer

Y Axis is driven by stepper motor and invetrer

Matters needing attention when bending:

A. The bending force of the workpiece must not be greater than the nominal force of the equipment. When working, one person should be in a unified command, so that the operator and the feeding and suppressing personnel should cooperate closely to ensure that the cooperating personnel can send out the bending signal in a safe position.

B. When bending the sheet, it should be placed in the middle of the equipment. The equipment should not be subjected to unilateral force, so as not to affect the accuracy of the workpiece and the equipment.